This is a fingure print sensor module with TTL UART interface for direct connections to microcontroller UART or to PC through MAX232 / USB-Serial adapter. The user can store the finger print data in the module and can configure it in 1:1 or 1: N mode for identifying the person.The FP module can directly interface with 3v3 or 5v Microcontroller. A level converter (like MAX232) is required for interfacing with PC serial port.
Optical biometric fingerprint reader with great features and can be embedded into a variety of end products, such as: access control, attendance, safety deposit box, car door locks
Features
- Integrated image collecting and algorithm chip together, ALL-in-One
- Fingerprint reader can conduct secondary development, can be embedded into a variety of end products
- Low power consumption, low cost, small size, excellent performance
- Professional optical technology, precise module manufacturing techniques
- Good image processing capabilities, can successfully capture image up to resolution 500 dpi
Specifications
- Fingerprint sensor type: Optical
- Sensor Life: 100 million times
- Static indicators: 15KVBacklight: bright green
- Interface: USB1.1/UART(TTL logical level)
- RS232 communication baud rate: 4800BPS~115200BPS changeable
- Dimension: 55*32*21.5mm
- Image Capture Surface 15—18(mm)
- Verification Speed: 0.3 sec
- Scanning Speed: 0.5 sec
- Character file size: 256 bytes
- Template size: 512 bytes
- Storage capacity: 250
- Security level: 5 (1,2,3,4,5(highest))
- False Acceptance Rate (FAR) :0.0001%
- False Rejection Rate (FRR): 0.1%
- Resolution 500 DPI
- Voltage :3.6-6.0 VDC
- Working current: Typical 90 mA, Peak 150mA
- Matching Method: 1: N
- Operating Environment Temperature: -20 to 45° centigrades
WORKING TUTORIAL: R305 FingerPrint Module With Arduino
