This is the Naze32 32-bit 10 DOF, 3-Axis Flight Controller Module for RC Airplanes/Drones. Designed for use with small indoor or small to mid-sized outdoor multirotor crafts, or as a standalone camera stabilizer. The Naze32 flight controller is extremely simple to ...
The CC3D boards are an all-in-one stabilization hardware which runs the OpenPilot firmware. It can fly any airframe from fixed wing to an octocopter and is configured and monitored using the OpenPilot Ground Control Station (GCS) software. ...
These propellers are lightweight, efficient and ...
These propellers are lightweight, efficient and are ideal for your multi-rotor project or even just for placing on your small fixed wing model. Supplied with shaft diameter adaptors, these will fit to almost any small electric model. ...
This is a DIY , easy to mount Camera mount for your Drones and Heli Models. The mount can be easily assembled and uses 9G Servo Motors to Pan and Tilt the camera using signals sent from Transmitter by Pilot.
The ...
PowerUp takes your home made paper plane and powers it for up to 30 seconds of flight with just a 20 second charge! The kit also includes directions for making 4 awesome paper air planes , and links to our website for ...
The all in one solution for Drone Racers. MakersKart Brings to you the All in one QAV 250 Racer Kit , packed with Turnigy 5X to keep your thoughts flying. The kit is a DIY Kit that can be assembled ...
The following is the Ultra Light KT Rudder Angle which is ideal for light aircrafts like Futaba Extra 330 Flatout. Works absolutely fine with a thick control rod. ...
The following is the Ultra Light KT Rudder Angle which is ideal for light aircrafts like Futaba Extra 330 Flatout. Works absolutely fine with a thick control rod. ...
This Standard Servo is ideal for robotics and basic movement projects. It can hold any position over a 180-degree range and is easily interfaced with microcontrollers like the Arduino. Use it to add movement to robots, animatronics, and even radio ...
This is a high-torque, Metallic Gear Servo Motor ideal for Hobby RC Activities like RC Boat, Car or even RC Plane. Made by Tower Pro Motors. It is Simulating MG946R High Speed Metal Gear Torque Digital Servo ,Stable and Shock ...
This Micro Servo is ideal for robotics and basic movement projects. This servo comes with four control arms, and has a 10" wire lead with a universal "S" type connector that fits most receivers. ...
The TowerPro MG995 Metal Gear Servo is suitable for various applications and delivers a driving torque of 13 KG. Also, is compatible with various types of TX-RX brands. ...
Tower Pro SG90 9g Servo Motor is ideal for hobby robotics and aviation projects as per your requirement. It provides a good amount of torque and is used widely in designing RC Planes. ...
This high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller ...
This Turnigy balance charger is simple to use, reliable and safe for any modeler. It features a smart charge protection to ensure the batteries are not overcharged and has real time monitoring increasing the cycle life of your battery packs ...
Perfect for smaller hands or for packing in your travel case, this new mini Turnigy 5X is a full range, entry level 2.4GHz transmitter that includes switchable mode functions between mode-1 and mode-2 (although this TX is configured to mode ...
This is a quality, reliable 2.4Ghz system suitable for beginners and pro pilots alike.Get that locked-in feeling that only 2.4Ghz glitch free technology can provide.Ultra fast reaction times and interference free control of your model is only achievable with this ...
The Turnigy Accucel 6 Balance Charger utilises quality FET's and resistors to accurately balance and charge LiPoly, LiFe, LiHV, NiMH, Nicd and Lead Acid batteries. ...
The Accucel-8150 is a Li-poly/Li-Fe battery charging workhorse. Capable of handling up to 8S, 7A or a maximum of 150W charging current plus it balances and discharges packs which is critical for keeping your expensive batteries in perfect condition. ...
The Turnigy AE series are based on new powerful microprocessor.
The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup. Also there is a separate voltage regulator IC for microprocessor providing good ...
The Turnigy B4 Compact Balance Charger makes charging of your Li-poly batteries easier than ever before. With no current limits or cell counts to set, you simply connect your battery to the B4 and it starts charging automatically ...
This Micro Servo is ideal for robotics and basic movement projects. This servo comes with four control arms, and has a 10" wire lead with a universal "S" type connector that fits most receivers. Easily interfaced with microcontrollers like the ...
The Makerskart Velcro Strap for Lipo Batteries is most suitable for mounting Lipo Batteries on RC Aircrafts and Hobby Pilot Aircrafts. Suitable to secure 3S, 4S and 5S Batteries on your Quadcopters, RC Planes etc. ...
Excellent W.S. Deans T-connector replacements.
Made from ...
Excellent W.S. Deans T-connector replacements.
Made from high-temp Nylon and gold plated spring connectors, both included in the injection mould at the time when forming the connector. The XT60 ensures a solid high-amp connection, perfect for applications up to and beyond 65A ...
