This is a high quality 2200mah, 3S Lipo Battery to use with RC Models such as Quadcopters, RC Planes and RC Cars. The battery is safe to handle as all the cells are shielded by aluminium sheets on both the ...
This is a DIY (Do-it-Yourself) Quadcopter Kit that contains all the components which are required to assemble and operate a Quadrotor. This is an all-in-one solution for Drone Building enthusiasts . ...
This is a DIY (Do-it-Yourself) Quadcopter Kit that contains all the components which are required to assemble and operate a Quadrotor. This is an all-in-one solution for Drone Building enthusiasts . ...
This is DYS 30A Electronic Speed Controller With SimonK Firmware MB30030. The ESC is most suitable for Multirotors ,RC Planes , Hovercrafts and any other RC Models ...
This is the DYS Outrunner Brushless DC Motor rated at 1100KV for Quadrotors and Multicopters. The motors are suitable for mid range Quadcopters like F450 or F550 and are compatible with 08x4.5 Propellers and 2-3S Lipo Batteries ...
This is a DIY (Do-it-Yourself) Quadcopter Kit that contains all the components which are required to assemble and operate a Quadrotor. This is an all-in-one solution for Drone Building enthusiasts . ...
This is a DIY (Do-it-Yourself) Quadcopter Kit that contains all the components which are required to assemble and operate a Quadrotor. This is an all-in-one solution for Drone Building enthusiasts . ...
This is the Naze32 32-bit 6DOF 3-Axis Flight Controller Module with MPU6050 for RC Airplanes/Drones. Designed for use with small indoor or small to mid-sized outdoor multirotor crafts, or as a standalone camera stabilizer. The Naze32 flight controller is extremely simple ...
This is the Naze32 32-bit 10 DOF, 3-Axis Flight Controller Module for RC Airplanes/Drones. Designed for use with small indoor or small to mid-sized outdoor multirotor crafts, or as a standalone camera stabilizer. The Naze32 flight controller is extremely simple to ...
The CC3D boards are an all-in-one stabilization hardware which runs the OpenPilot firmware. It can fly any airframe from fixed wing to an octocopter and is configured and monitored using the OpenPilot Ground Control Station (GCS) software. ...
This is a DIY , easy to mount Camera mount for your Drones and Heli Models. The mount can be easily assembled and uses 9G Servo Motors to Pan and Tilt the camera using signals sent from Transmitter by Pilot.
The ...
The all in one solution for Drone Racers. MakersKart Brings to you the All in one QAV 250 Racer Kit , packed with Turnigy 5X to keep your thoughts flying. The kit is a DIY Kit that can be assembled ...
