GY-9150/MPU-9150 is the world's first nine-axis ...
GY-9150/MPU-9150 is the world's first nine-axis Motion Tracking components designed for low-power, low-cost, high-performance consumer electronics products as smart phones, tablet, wearable sensors and other devices ...
This Hall effect sensor module serves as a direct real time analog output sensor for detecting varying magnetic fields and continuously varying magnetic fields. ...
HC-05 is a class-2 bluetooth module with Serial Port Profile, which can configure as either Master or slave. a Drop-in replacement for wired serial connections, transparent usage. ...
This is the HC-06 Industrial Bluetooth Module which is a Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project etc. and Computer ...
It is a pre-programmed controller board with on board accelerometer ,Gyro sensor and ESCs on board especially designed for Micro Quadcopters. It can be used to design model Quadcopters on a micro level. ...
This is the HL-803 Foam Glider/ Fixed Wing Aircraft with a 2.4 GHz Transmitter. This is a ready-to-fly glider to learn the basics of RC Aircraft operation and to understand the aerodynamics of an RC Aircraft. The transmitter provided is ...
The GY-273 module is based on the HMC5883L IC for low-field magnetic sensing with a digital interface for applications such as low cost compassing and magnetometry. ...
HR202 humidity resistance is the use of organic polymer materials of a new humidity sensor, humidity sensing range, stable performance, long-term to use, it can be applied to warehousing, cars, indoor air quality control, building automation, medical, industrial control systems ...
This is a Line sensing Hunt Sensor Module that can be used to detect black/white surface or any obstacle for your Microcontroller. Also can be used to detect obstacles linearly. ...
If you’ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up ...
This is an Infrared Barrier Module that can be used with any microcontroller unit. When the module detects obstacles in front of signal transmitted by IR LED, green indicator light goes ON, and "OUT" port sustains transfers low-level signals. ...
The Intel® Edison compute module plus an expansion board interfaces with a wide range of Arduino* Uno R3 shields, allowing for quick and easy prototyping with open source hardware and a software development environment.Designed for expert makers, entrepreneurs, and some ...
The Intel® Galileo Gen 2 development board is a microcontroller board based on the Intel® Quark™SoC X1000 application processor, a 32-bit Intel® Pentium® brand system on a chip (SoC). It is the first board based on Intel® architecture designed to be ...
This is an All-in-one DIY Internet of Things Starter Kit. Using this kit anybody can take their first baby steps is the field of Automation using Internet of Things technology that is spreading like a fire in our Concrete Jungles. ...
Charge your iPhone 6 Plus and Watch in style!
This is meant for use with the iPhone 6 Plus with the 1mm hard silicone case. It can be used without the case as shown in the picture, but it is a ...
PIR infrared sensor module is based on infrared technology, automatic control products. High sensitivity, high reliability, low power consumption, low voltage operation mode. Widely used in various auto-sensing electrical equipment, especially for battery-powered automatic control products. ...
Great for experimental projects and building your own remote control. Low-voltage. Elliptical lens helps block light noise from above and below the center frequency of 38kH ...
This module is made using IC ISD 1820, a single message record and playback device. It can record and play sound signals of 10 seconds duration. Recording is stored into on-chip non-volatile memory having data retention up to 100 years ...
This is a pair of JST Line connectors , both male and female sockets with pre-soldered wires. This can be used to make a 2S Lipo connector, to power up an LED Strip and various other purposes. ...
This is Hall Effect magnetic sensor module working on DC 5V for Arduino. It has a Small size and high sensitivity. Also, it gives a Fast response . ...
This is a DIY (Do-it-Yourself) Hexacopter Kit that contains all the components which are required to assemble and operate a Hexacopter. This is an all-in-one solution for Drone Building enthusiasts . ...
This is a DIY (Do-it-Yourself) Hexacopter Kit that contains all the components which are required to assemble and operate a Hexarotor. This is an all-in-one solution for Drone Building enthusiasts . ...
This is a DIY (Do-it-Yourself) Quadcopter Kit that contains all the components which are required to assemble and operate a Quadrotor. This is an all-in-one solution for Drone Building enthusiasts . ...
This is a DIY (Do-it-Yourself) Quadcopter Kit that contains all the components which are required to assemble and operate a Quadrotor. This is an all-in-one solution for Drone Building enthusiasts . ...
It is a pre-programmed controller board with on board accelerometer and Gyro sensor especially designed for UAVs. It can be used to design model aircrafts, drones, quadcopters etc. ...
Smart WiFi is a Wi-Fi module development kit that can help you to
prototype your Wi-Fi based products within a few lines of Lua script.Based on ESP8266 chip and module built over it, the board is packed with many exciting features & ...
L293D is quadruple high-current half-H driver.The ...
L293D is quadruple high-current half-H driver.The L293 is designed to provide bidirectional drive currents of up to 1 A at voltages from 4.5 V to 36 V. The L293D is designed to provide bidirectional drive currents of up to 600-mA ...
