The Turnigy Accucel 6 Balance Charger utilises quality FET’s and resistors to accurately balance and charge LiPoly, LiFe, LiHV, NiMH, Nicd and Lead Acid batteries.
If you are looking for a charger for your Bolt batteries this unit is perfect as a low cost, go anywhere solution. The Accucel-6 will handle LiHV/LiPoly/LiFe up to 6S and NiMH/NiCd up to 15S and shows individual cell voltage throughout the charge cycle.
The intuitive menu system means charging and cycling is an easy process and can be done quickly and accurately. And because this is a 12v DC charger you can power it up at the field using a 12v car battery or at home with a 12v power supply.
It is also able to connect this charger to your PC using a USB cable (not supplied) so you can monitor pack voltage, cell voltage and other data through real-time graphs during charging. You can also control charging and update firmware from “Charge Master”.
Also included with the Accucel-6 are input and output wires with XT60 plugs.
Features:
- Microprocessor controlled
- Individual cell balancing
- LiHV, Li-ion, LiPoly and LiFe capable
- Ni-Cd and NiMH capable
- Delta-peak sensitivity (NiMH/NiCd)
- Lead Acid capable
- Large range of charge currents
- Terminal Voltage Control (TVC)
- Lipo Battery Meter
- Battery Internal Resistance Meter
- Store function, allows safe storage current
- Time limit function
- Temerature Cut-off (20-80 degree Celcius/68-176 Fahrenheit)
- Input voltage monitoring. (Protects car batteries at the field)
- Data storage (Store up to 10 packs in memory)
- Battery break in and cycling. (1-5 cycles)
Specs:
- Input Voltage: 11~18v
- Circuit Power: Max Charge: 80W / Max Discharge: 10W
- Charge Current Range: .1~10.0A
- Balance Cells: 2-6 cells
- NiMH/NiCd Cells: 1~15
- LiHVLiIon/LiPoly Cells: 1~6
- Pb battery Voltage: 2~20v
Package Includes:
- Accucell 6 80W Charger
- XT60 with Banana connector Charging Cable (430mm)
- XT60 with Banana connector Charging Cable (300mm)
- XT60 with Alligator Clip Charging Cable
