DSN6009 4A is a high-performance step-up switching current (BOOST) module. The module uses the second generation of high-frequency switching technology XL6009E1 core chip performance than the first generation technology LM2577. XL6009 boost module is at a lower cost, and superior performance.
Test comparison sample reference are:
- 1. Input 3V Output 12V 0.4A 4.8W
- 2. Input 5V Output 12V 0.8A 9.6W
- 3. Input 7.4V Output 12V 1.5A 18W
- 4. Input 12V Output 15V 2A 30W
- 5. Input 12V Output 16V 2A 32W
- 6. Input 12V Output 18V 1.6A 28.8W
- 7. Input 12V Output 19V 1.5A 28.5W
- 8. Input 12V Output 24V 1 A 24W
- 9. IN-IN + input Positive Input Negative
- 10.Positive output OUT + OUT-output negative
- 11.Vin * Iin * Efficiency = Vout * Iout
It have Wide input voltage 3V ~ 32V, optimum operating voltage range is 5 ~ 32V,Wide Output voltage 5V ~ 35V. It have Built-4A efficient MOSFET switches enable efficiency up to 94%; (LM2577 current is 3A), high switching frequency 400KHz, can use a small-capacity filter capacitors that can achieve very good results, the ripple smaller and smaller. (LM2577 frequency only 50KHz).
Technical parameters:
- 1. Module Properties: on-isolated boost (BOOST)
- 2. Rectification: Non-Synchronous Rectification
- 3. Input Range: 3V ~ 32V
- 4. Output Range: 5V ~ 35V
- 5. Input Current: 4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.
- 6. Conversion efficiency: <94% (greater the pressure, the lower the efficiency)
- 7. Switching frequency: 400KHz
- 8. Output Ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple)
- 9. Load Regulation: ± 0.5%
- 10.Voltage Regulation: ± 0.5%
- 11.Operating Temperature:-40 ℃ ~ +85 ℃
